Registrato: 8 mesi, 1 settimana fa
Introduction to Panic Alarms
The aim of a panic alarm is to allow a person under duress to quickly and silently call for help in the event of an emergency. Panic alarms are additionally called "duress alarms", "hold-up alarms", or "panic buttons".
Panic alarms are used when it could also be unsafe or uncomfortable to call for help in different ways. For instance, if a belligerent particular person is standing in your lobby, it may be unwise to further escalate the situation by picking up a phone to call for assistance. A panic alarm can provide a quick and handy way to summon help without drawing attention.
Silva Consultants feels that nearly every enterprise can benefit from the use of panic alarms. Places where panic alarms could also be particularly helpful embody:
Receptionist's desks in building lobbies.
Security stations and checkpoints.
Customer service counters.
Check-out counters and cashier's stations.
Rooms where money or other valuables are received, processed, or stored.
Interview rooms in Human Resources department.
Executive office suites.
Locations where confrontations with the public are likely to occur.
Elements of a Panic Alarm System
Panic alarms include fundamental parts:
The panic button is the machine that the particular person activates when she or he needs help. There are lots of kinds of panic buttons available. These can have a single pushbutton, pushbuttons that must be pressed concurrently, devices that have to be squeezed, and units which might be activated by a foot or knee. There are additionally devices that may be covertly activated when cash or a product is removed on the request of a robber. Most panic buttons are specifically designed to withstand unintended activation.
Panic buttons are normally put in in a location the place they can simply be reached, yet out of view of the informal observer. In many cases, panic buttons are installed on the underside of a desk or counter-top.
Panic buttons could be the wired type or wireless type. Wired panic buttons are connected using cabling. Wired panic buttons are very reliable, but it can typically be difficult and dear to get cable to each panic button location.
Wireless panic buttons use a short-range radio transmitter, much like that used with a garage door opener. Wireless panic buttons are simple to put in and could be placed just about anywhere. Wireless panic buttons will also be carried round on the premises by staff if desired. Wireless panic buttons require batteries and need to be tested frequently to guarantee that they are working properly.
The communications system is the method that's used to summon assist when a panic button is pressed. The type of communications system used relies upon largely on the resources available at the facility where the panic alarm is being put in and the level of security threat.
Types of communications systems used can embody:
Communications to an off-site alarm monitoring heart:
This method would typically be used at facilities that shouldn't have an on-site security workers, comparable to at a small business. The panic buttons would be connected to an alarm control panel which sends a signal to the monitoring heart when a panic button is pressed. The alarm monitoring heart would then call the police or different appropriate people to reply to the site.
Communications to security management middle:
Most large companies have some type of centralized security monitoring and management center, either on-site, or at a central location somewhere within their organization. When this type of resource exists, panic buttons are typically monitored on the control center. Most often, panic buttons are connected to the organization's access control and security administration system, which transmits the alarm to the control center.
When a panic button is pressed, it sounds an alarm within the security management center. The center would then dispatch local security officers and/or the police to answer the site.
Communications to non-security personnel:
Some organizations that do not have on-site security select to notify non-security personnel when a panic button is pressed. Usually, the organization will form a "response workforce" consisting of staff from a number of departments (Facilities, HR, etc.) and ask that these workers respond when a panic button is pressed.
There are various systems that can be used to inform the response workforce when a panic button has been pressed. These embrace can embrace overhead paging systems and units that ship voice messages, textual content messages, or email messages directly to smartphones.
If you have any sort of inquiries pertaining to where and how you can utilize Importance of workplace panic buttons, you can contact us at our site.
Topic aperti: 0
Risposte create: 0
Ruolo forum: Partecipante